North Star RV Inspections, LLC Follows The NRVIA Code of Ethics

1. Introduction
The National Recreational Vehicle Inspectors Association or NRVIA is a not for profit professional
association. Membership in the NRVIA is voluntary and its members are RV Inspectors and industry
affiliates whose purpose is to promote excellence in the profession and continued improvement of its
members’ inspection services to the public.
Use of the NRVIA logo and name is limited to those members of good standing who may utilize this
logo and name in their professional promotions and advertising.
The NRVIA designation of Certified RV Inspector is permitted only to be use by those individuals that
have met the requirements and testing standards established by NRVIA.

2. Purpose, Scope and General Statements
2.1 – The purpose of the Standards of Practice is to establish a uniform standard for RV Inspectors to
inspect and report in an objective manner the conditions of a Recreational Vehicle and its
components.
2.2 – The Standards describe the components, and systems included in a RV Inspection.
2.3 – The Standards apply to motorized and towable types of RVs as defined by the RV Industry.
2.4 – The Standards apply to a visual inspection of those areas, components and systems that are
readily accessible to determine at the time of inspection that they are performing their intended
function without regard to life expectancy.
2.5 – The purpose of the RV inspection is to identify visible and operational defects as permitted by
the current conditions that in the judgment of the RV Inspector will adversely affect the function or
integrity of the items, components and systems of the Recreational Vehicle.
2.6 – RV Inspections performed under the Standards of Practice are basically visual and rely upon
the opinion, judgment, education and experience of the RV Inspector and are not intended to be
technically exhaustive.
2.7 – RV Inspections shall be performed in a time period sufficient to allow compliance with the
provisions of the NRVIA Standards of Practice.
2.8 – RV Inspections performed under the Standards shall not be construed as being a compliance
inspection of any code, governmental regulation or manufacturer’s installation instructions or
procedures. In the event a law, statue or ordinance prohibits a procedure recommended in the
Standards, the RV Inspector is relieved of the obligation to adhere to the prohibited part of the
Standards.
2.9 – RV Inspections performed under the Standards are not an expressed, implied warranty or
guarantee of adequacy, performance or useful life of any RV, any of its components or systems.
2.10 – Only those items specifically listed on the RV Inspection Report will be included in the RV
Inspectors evaluation.
2.11 – The RV Inspector shall report any system or component included in the Standards of Practice
which were present at the time of the RV Inspection but were NOT inspected and provide the reason
they were not inspected.

3. General Limitations and Exclusions
3.1 – RV Inspections performed under the Standards of Practice exclude any items concealed or not
ready accessible to the RV Inspector. The RV Inspector is not required to move furniture, personal or
stored items. Lifting floor covering, accessing interior walls and ceilings in which could damage or
destroy the components or systems being evaluated is not part of the RV Inspection.
3.2 – The determination of the presence of damage caused by insects or water is only to be
evaluated by observation with an opinion being rendered by RV Inspector that is to make the client
aware of the issue.
3.3 – Excluded from the Standards of Practice is the determination of indoor air quality of the RV and
it’s consequence of physical damage, toxicity, odors, waste products and noxiousness.
3.4 – The RV Inspection and report are opinions only that are based upon the visual observation of
the existing conditions of the RV at the time of the RV Inspection. The report is not intended to be or
construed as a guarantee, warranty or any form of insurance. The RV Inspector will not be
responsible for any repairs or replacement with regard to the RV or its contents.
3.5 – The RV Inspector is not required to enter any premises that visibly show a threat to the safety of
the RV Inspector or others nor inspect any area or component that poses a danger to the RV
Inspector or others.
3.6 – The NRVIA Certified RV Inspector will inspect and report on the following RV items and
conditions during the RV Inspection. Any additional items of inspection will be dependent upon the
agreement between the client and the RV Inspector.

4. Exterior Components
4.0 – Roof
4.1 – Roof Type
4.2 – General condition of the roof
4.3 – Joints and Seals
4.4 – Vents
4.5 – Vent covers
4.6 – Plumbing vents
4.7 – Air Conditioning Covers and Exterior Coils
4.8 – Ladder
4.9 – Satellite Antenna
4.10 – Radio Antenna
4.11 – Refrigerator Vent
4.12 – Skylight(s)
4.13 – Storage Containers
4.14 – Spot lights
4.15 – Air Horns
4.16 – Solar Panels
4.17 – Signs of Equipment removed

5. Side Walls
5.0 – Walls – Front, Rear and Sides
5.1 – Type of Construction
5.2 – Front type of Construction and Condition
5.3 – Street Side Wall Construction and Condition
5.4 – Curb Side Wall Construction and Condition
5.5 – Rear type of Construction and Condition
5.6 – Decals and Paint
5.7 – Corner Joints, Trim and Gutters

6. Doors
6.0 – Entrance Doors
6.1 – Condition of Door(s)
6.2 – Screens
6.3 – Decals and Trim
6.4 – Latch and Lock Systems

7. Windows
7.0 – Windows
7.1 – Type of Windows
7.2 – Condition of Windows
7.3 – Emergency Windows
7.4 – Seals and Gaskets
7.5 – Window Screens

8. Storage
8.0 – Storage Compartments
8.1 – Door and Interior Compartment Conditions
8.2 – Door lock types
8.3 – Seals and Waterproofing
8.4 – Area around Compartment Condition
8.5 – Operation of Doors and Locks
8.6 – Hinges and gas cylinders
8.7 – Slide Out trays and Shelves
8.8 – Flooring and Interior Walls of Compartment
8.9 – Compartment Lights

9. Awnings
9.0 – Awnings
9.1 – Type of Awnings
9.2 – Sizes of Awning
9.3 – Fabric and its Condition
9.4 – Manual or Electric Operation
9.5 – Hardware and Locks Condition

10. Slide-Out Topper Awnings
10.0 – Slide-Out Topper Awnings
10.1 – Type of Awnings
10.2 – Sizes of Awning
10.3 – Fabric and its Condition
10.4 – Manual or Electric Operation
10.5 – Hardware and Locks Condition

11. Window Awnings
11.0 – Window Awnings
11.1 – Type of Awnings
11.2 – Sizes of Awning
11.3 – Fabric and its Condition
11.4 –Manual or Electric Operation
11.5 – Hardware and Locks Condition

12. Slide Out
12.0 – Slide Out
12.1 – Type of Drive – Hydraulic, Electric, Cable or Schwintek
12.2 – Mechanical Operation of Slide System
12.3 – Condition of Seals
12.4 – Tracking/Rack System Type and Condition
12.5 – Misc. Trim and Decals of Slides

13. Exterior – Chassis/Frame
13.0 – Frame and Components
13.1 – Frame Type and Condition
13.2 – Axles, Springs, Shocks and Hanger Components
13.3 – Wheels/Tires and Rims – Type and Condition
13.4 – Brake Types 
13.5 – Spare Tire and Mounting Rack
13.6 – Leveling/Stabilization System Type and Condition
13.7 – Operation of Leveling/Stabilization System
13.8 – Hitch and Pin Box Equipment
13.9 – Chains and Break Away Switch Operation

14. Steps
14.0 – Steps
14.1 – Type of Steps – Manual/Electric/Hydraulic
14.2 – Condition and Operation
14.3 – Non –Skid stripes and Grab Handles

15. Chassis Lights
15.0 – Chassis Lights and Markers
15.1 – Types of Light Bulbs
15.2 – Operation of Turn Signals, Marker Lights, Brake Lights and Other Lights

16. Chassis Voltage System
16.0 – Chassis Voltage System – 12 volt DC
16.1 – Visual Condition of Batteries
16.2 – Visual Condition of Cables and Connectors
16.3 – Disconnect Switch

17. Misc. Electrical System
17.0 – Cable TV Hook Up (visual only)
17.1 – Satellite TV Hook Up (visual only)

18. Utilities
18.0 – 12 Volt DC House (Coach) Voltage – Deep Cycle
18.1 – Visual Condition of Batteries
18.2 – Visual Condition of Cables and Connectors
18.3 – Disconnect Switch
18.4 – Converter Operation
18.5 – Interior Lights and Fans
18.6 – Exterior Porch and Security Lights
18.7 – Antenna Signal Booster

19. Electrical
19.0 – 120 Volt AC House/Pedestal Power
19.1 – Visual Inspection of Power Cord
19.2 – Verify Power from Pedestal
19.3 – Perform Hot Skin Test
19.4 – Inspect Interior of Breaker Panel Box – Breakers and Wiring
19.5 – Operation of GFCI Circuits
19.6 – Polarity of all Wall Receptacles
19.7 – Operation of Ceiling Fans and Lights

20. Inverter
20.0 – Inverter System
20.1 – Type and General Condition and Operation of Inverter
20.2 – Cables, Wiring and Fuses
20.3 – Verify Operation of Inverter with Load

21. Generator
21.0 – Generator
21.1 – Type and Operation of Generator
21.2 – Oil and Filter
21.3 – Fuel/Prime Switch Operation
21.4 – Circuit Breaker Operation
21.5 – Verify Operation with Load

22. Plumbing – City Fresh Water
22.0 – Plumbing – City Fresh Water
22.1 – City Hook Up Condition
22.2 – Verify Inline Check Valve
22.3 – Inspect the Inline Water Filter
22.4 – Faucets and Shower Fixtures
22.5 – Shower Doors, Racks and Other Hardware

23. Plumbing – On Demand Water System
23.0 – Plumbing – On Demand Water System
23.1 – Verify Water Tank will hold Water
23.2 – Test Water Pump operation for pressure
23.3 – Does Water System hold pressure
23.4 – Do all water fixtures function
23.5 – Verify Operation of Exterior Shower
23.6 – Verify Seal Cap on Discharge Line

24. Plumbing – Black Water Waste Systems
24.0 – Plumbing – Black Water Waste Systems
24.1 – Valve and Handle operation
24.2 – Check Sealing of Valve
24.3 – Tank Wash System Function - Present and Labeled
24.5 – Toilet Flapper Seal Holding Water

25. Plumbing – Gray Water Waste Systems
25.0 – Plumbing – Gray and Galley Waste System
25.1 – Valves and Handles operation
25.2 – Check Sealing of Valves

26. Propane System
26.0 – Propane System
26.1 – Inspect Condition of ASME Tank or DOT Cylinder(s)
26.2 – Date of DOT Cylinders
26.3 – High Pressure hose and fittings Condition
26.4 – Inspect Regulator, Cover and Positioning
26.5 – Verify Inline Regulator on Split DOT Cylinders
26.6 – Perform Leak Test – 8” W.C. for 5 min. – Document Test Procedure

27. Refrigerator
27.0 – Refrigerator
27.1 – Make and Model of Refrigerator
27.2 – Operates on various Heat Sources
27.3 – Doors Latch and Seal correctly
27.4 – Can Refrigerator maintain its temperature range
27.5 – Recall Kit Installed
27.6 – Does Condensate Line Drain
27.7 – Interior Light Function

28. Water Heater
28.0 – Water Heater
28.1 – Make and Model of Water Heater
28.2 – General Condition of Unit
28.3 – Operates on various Heat Sources - Verify Output Temperatures
28.4 – By Pass Valve Operates
28.5 – Anode Rod (Suburban required)
28.6 – Dauber Screens Installed

29. Furnace
29.0 – Furnace
29.1 – Make and Model of Furnace
29.2 – General Condition of Unit
29.3 – Operates Properly
29.4 – Does Furnace motor Function Properly
29.5 – Dauber Screens Installed

30. Cook Top/Stove
30.0 – Cook Top/Stove
30.1 – Make and Model of Cook Top/Stove
30.2 – General Condition of Unit
30.3 – Oven burner and Top Burners Light as Designed
30.3 – Exhaust Fan (vent a hood) Functions

31. Air Conditioner(s)
31.0 – Air Conditioner(s)
31.1 – Make and Models of Air Conditioner(s)
31.2 – Ducted/Non Ducted/T-Stat/Manual Control
31.3 – Filter Clean
31.4 – Plenum Divided and Sealed
31.5 – # of Degrees Delta T for each Unit

32. Microwave
32.0 – Microwave
32.1 – Make and Model of Microwave
32.2 – General Condition of Unit
32.3 – Heats Cup of Water
32.4 – Turn Table and Components in Microwave

33. Washer/Dryer
33.0 – Washer/Dryer
33.1 – Make and Model of Each Unit
33.2 – General Condition of Units
33.3 – Operate Washer and Dryer

34. Ceiling Condition and Appearance
34.0 – Ceiling
34.1 – General Condition of Ceiling and Skylights
34.2 – Discoloration, Damage or Stain
34.3 – Operation of Roof Vents
34.4 – Light Switch and Fixtures

35. Walls Condition and Appearance
35.0 – Walls
35.1 – General Condition of Walls
35.2 – Damage, Discoloration or Stains
35.3 – Have Repairs Been Performed
35.4 – Window Coverings/Shades

36. Floors Condition and Appearance
36.0 – Floors
36.1 – General Condition of Floors
36.2 – Carpet/Vinyl
36.3 – Water Damage/Soft Spots
36.4 – Repairs Performed

37. Cabinets Condition and Appearance
37.0 – Cabinets/Trim Work
37.1 – Condition of Doors, Drawers and Bookshelves
37.2 – Countertop and Sink Condition
37.3 – Hardware and Latches
37.4 – Previous Repairs

38. Furniture Condition and Appearance
38.0 – Furniture and Accessories
38.1 – General Condition of the Furniture/Accessories
38.2 – Damages/ Repairs/Replaced Units
38.3 – Matching Fabrics with Décor

39. Entertainment Components
39.0 – Entertainment Components
39.1 – Model and Serial Numbers of all pieces Entertainment Components
39.2 – Do all Components Function

40. Vehicle Data Information
40.0 – Vehicle Data Information
40.1 – Inspection Sticker/License Plate Current
40.2 – GVW and CCC information

41. Motor Home Chassis
41.0 – Motor Home Chassis
41.1 – General Condition of Cockpit/Navigation Area
41.2 – Mileage/Hours
41.3 – Dash Controls/Gauges

42. Engine Compartment
42.0 – Engine Compartment
42.1 – Clean Engine/Transmission
42.2 – Oil/Fluids
42.3 – Hoses/Belt/Radiator/Fans Condition

43. Exhaust System
43.0 – Exhaust System
43.1 – General Condition of Exhaust System
43.2 – Exhaust Pipe/Converter/Muffler/Brackets in Place

44. Accessories & Misc
44.0 – Accessories
44.1 – Back Up Camera
44.2 – Misc. Items